www.slosailandcanvas.com

Hmmm! not too sure why that posted twice, my apologies. YMMV?Edited by turbohobo on Mar 18, 2011 - 10:39 AM.

Every product you purchase has a disclaimer in tiny letters about the use/misuse of the product, if applied correctly the product will live up to expe...

Every product you purchase has a disclaimer in tiny letters about the use/misuse of the product, if applied correctly the product will live up to expe...

PS, you want the Poliglow Boat Polish Kit , free S&H untill 3/31/2011

Travis, this is what I use and cannot recommend it enough . The kit comes with Poliprep which will remove oxidization but if it is as heavy as you say...

Here is a match-up if you're prepared to travel

1st thing I did when I got my P18 was check out the steering system, learned from my H16 just how important this is on a cat, figured out how it opera...

Travis, I will shoot you a pic via e-mail, and yes the sailtrack begins just above the mast rotator.Edited by turbohobo on Feb 23, 2011 - 09:44 AM.

Travis, if halyard ring is already attached to main halyard then halyard will run over sheave on mast head, down the inside of the mast and will exit ...

twilliams, I picked up a P18 just 3 months ago, can help you out but need an e-mail address, there is no info under your personal information, please ...

one thing I forgot to mention, if you grab the rudders and break them free, the cams will pivot up into the ready position, if you grab the tiller arm...

On the older Hobies a problem that presented was that the tiller arm would not lock down when rudders were all the way down, this was due to wear from...

Stoshy, check your Private Messages (PM) or just contact me, thanks.

Well that's just peachy, YOU THINK!....got snowed in and am still digging out, sheesh! Don't ya just luv winter...... :boohoo:

Then just make sure that when laying the carpet, leave enough of an overlap to go over the edges and partially down the outside of the cradle.Edited b...

On either side of the inspection port/hatch are 2 grommets on the tramp, your bungee/shock cord runs through those grommets under the tramp, attached ...

Drill hole in 1st layer of fiberglass, take a long thin metal probe and insert, push down through foam untill you "feel" 2nd layer of fiberglass, mark...

Definitely hold off on the paint, if the cat is in as good shape as you say, other than maybe the colour, you can refurbish the hulls using an orbital...

I have a new Chrysler T&C, 4.0 L. It was a little of both I guess, there was a good headwind and I had attached a cargo carrier to the trailer in whic...

No reply on my post! so were going to HHI on vacation, last time here island shut down for winter, nothing going on, nada nix, no cats for rental. So ...

now if they would only come up with a rotomolded, boardless, squaretop.......Hobie 18! :bomb: Da Bomb

Thanks Andrew, Chris & Damon, I do know the basics of airflow over a wing surface, the wing is cambered on top, flat surface on bottom, airflow accele...

Just about any shop selling boats will/should have all the rollers you need

I get it, with the sail rigged loose-foot, you are able to curve the sail more by easing off on both the downhaul and outhaul, more so than on the fix...

Yup! pretty much what I had already figured out even with my limited experience, the H16 mast base had a stopper and limits the amount of mast rotatio...

I hear you Scott, on my H16 the mainsail was permanently attached to the boom, made for easier rigging/derigging of the mainsail, on the P18, it takes...

Ground Control to all sailors in the Hilton Head Area, come in please! :director: anyone out there?

Have tried to contact Jim on the above e-mail address, keeps coming back as "address unknown", anyone have an update?