Is that a good place for tired sailors to eat? edited by: skarr1, Sep 22, 2010 - 05:08 PM

I am going to try to sail at the secret spot this weekend. Will be staying at Davis Bayou National Park. Eat breakfast at Denny's "don't have one in ...

Thanks Tami, I think I will launch with Terry and Coastrat.

Key Sailing. My 5.8 on the beach at Key Sailing. And looking in the other direction.

Tami, do you have room to launch my 5.8 from your yard. I would of also need your help putting it together!!edited by: skarr1, Sep 21, 2010 - 07:32 PM

Here are 36 other hobie sixteens. You can compare window placements.

This is from the hobie site the window is at the top of the first panel. There are 8 batons in both your sail and the hobie. The windows on my nacra ...

main sail luff = 24' foot = 9' leach = 25.22' jib sail luff = 16' foot = 5.75' leach = 15.75' I found this on the net might not be correct. You need...

Like jacket info.

Shearwater Regatta, October 23-24, 2010 At Ocean Springs. edited by: skarr1, Sep 17, 2010 - 10:01 AM

Once you remove the head off the rivet, a punch and hammer will drive the rivet out of the hole.

I don't think they know what shear-water is and nether do I

About 8 years ago I took one of my friends and his the girl friend now wife for there first ever sail on any kind of boat. All he knew of sailing was ...

Here are some 5.2 photos with out the center tube. Here are some with the center tube. More edited by: skarr1, Sep 16, 2010 - 08:59 PM

I think the main purpose of the bar is to keep the main beam from rotating. Some owners remove the bar and add rivets to the main beam straps to keep...

Hey Culley, Your 6.0 has the same sail number as my 5.8. So I have the 230th 5.8 and you have the 230th 6.0.

You can go here for the times. Just click on the fleet your interested in.

Any sailing at the secret spot this weekend?

Yes they will get separated I just don't want them to do it on purpose.

Part of my taking newbies to sail speech is to tell them not to let go of the boat.

The pressure ridge is behind the plane!! They are caused by different sheets of ice pushing against each other. I am not an expert on this subject an...

After looking at the photo of the boat on the trailer, what is the bottle looking thing on the dolphin striker bar? There is also a line tied to the...

I think the trap on the starboard side is "temporary". He had three lines break. I added a shock cord to the rear beam to keep the end caps from ...

Here is how your traps can be rigged. All the wires from the mast hound "where the stays connect should be the same length. You can adjust the heigh...

With the trailer hooked to the truck. I place the mast on the ball and wrap the trailer winch strap twice around the mast at the rear beam. The cre...

You do not want anything that will hold dirt or sand. The grease would get all over you and the boat.

Does your traveler car look like this. Silicone will work on the car also. Looks like the rollers are not replaceable. edited by: skarr1, Sep 12,...

Murrays list a halyard for a 5.0 that is part wire. Maybe the wire hooks on the bottom of the mast like a Hobie.

My Nacra mast base looks like this. Make sure the ball is screwed all the way down, mine turns easy and I have found it not all the way down. There ...

The old $153.85 This is what is on my boat. If I had to replace them it would be with the new carbo blocks that are cheaper. The new $116.20