Thanks, thinking my boat has the newer daggerboard cassettes. Link follows for the mast base issue. br /> It's for Nacra 16's built after 2014 and N...

bought one here:

Home depot for some outdoor carpet. Cut into strips and applied tape. Cut into sections to install. Used outdoor rated permanent tape, 3M. . Has been ...

David, your pic isn't pulling up for some reason. Would love to see it. Is this what you are talking about? . Trying to figure out how to make this wo...

Have sales coming over on a container from Performance Sails, shipping March 25th. Bought from recmarinesales.com.

Couple of JLB flip 4's to connect to my waterproof Samsung phone via Bluetooth.

Some good points in Joseph Bennett's recent video on a H16.

for those who need hulls or parts.

I will one day...have an A-Cat in my hanger.

3-4 years ago bought one from Kinder Industries which I use mast up on a boat lift. Still looks great although prob could replace some of the hook and...

Video on facebook for sailbox.

Box looks big enough for the spin pole. My pole is a two piece, remove the hoop, pull it apart, shorter than the boom. My trailer has a 12" PVC tube o...

I purchased polyester laminate sails from Performance Sails/Todd for my 20 a couple of years ago. Great sails! Recommend highly.

Looks like need to copy and paste the links for the pictures.

3M backed is sticky. Apply and bond increases over time. I can peal it up with some force. No issues sailing at 75+Mph....down the highway! Photos.....

Post some pics on Monday when can get to boat.

This past summer, started out buying some grooved and a couple of false starts.. then I bought smooth hydroturf with the 3M backing (used dark gray) a...

Came with my boat but work well and reasonably priced.

Learn something almost everyday. I don't have a 2-1. Pull hard and cleat. Might have to try installing.

Had same issue. Bought new traveler car but never installed it. Couple of drops of "Harken McLube Sailkote One-Drop" and now rolls freely. Might be wo...

Also you can pretty much ignore the bottom 1/3rd of the mast.. Don't think should ignore the bottom 1/3rd. Work on sealing both ends. My logic goes l...

Used a straight edge on the cut and played with medium coarse sanding pad to get the edge angle. Worked pretty well and was controllable. YouTube guy ...

Bought some of both for my 2000 I20. Like the diamond cut better. Worked on trying to put it on last year. Made a template for the port hull with he...

Ronstan Sticky Race Gloves Stohlquist Drifter PFD ForwardWIP Flex Smock Black ForwardWIP Harnesses either Pro or Light, both are great My two cents.....