There is a little black chip. It may be difficult to see in the picture. The manual is great you have a link to. Unfortunately the format does not al...

your mast also appears to be level do you have a low front mast support?

where do you attach the tack of the jib? i have been just attaching it to the forestay but it rides high since i pull the jib until it stops

where do you get those? do they need to be welded on?

It’s a bit of a PITA to undo the stopper knot, remove the sister clip, pull the line through the cleat, then remove-attach the sister clip each time. ...

Thanks I don't like the looks of that. Does it ever move and is it easy to tie the mast down quickly and securely? Was it easy to cut?

Do you have any pictures of a pvc device? I can't picture what your describing.

Thanks I like the pigtail idea. Do you just store the pigtail in the car and reattached to lower the jib? I assume the pigtail attachment needs to f...

the jib is not a problem because the furler the anchor idea seems likes it will work i was thinking to fold the main like a accordian but any wind c...

No wishbone. The pin idea seems very difficult. Is this something you have done? I think a clove hitch around the mast may work similar to what short...

I think I need some lesson from this guy Edited by rungi on Sep 20, 2021 - 11:53 PM.

I mean cheap, easy and quick to stop the mast rotating just so it not swinging back and forth on every wave Can anyone land a catamaran safely on...

The boat is a nacra 5.7

Anyone know where can you buy the Colorado big bag Also would a strap be better than a rope from the top of the dolphin striker to over the hull? It...

You can right the 21 foot cat with ease? using a Colorado bag? Can you describe the process you use?

The drain plug screw out but the entire thing is riveted onto the hull. Anyway I finished the repair. Was pretty easy. Used the west system 106 with ...

I think the drain plugs are always riveted in place. The boat has been repaired before. I never got the how to do it part?

Is the goop is silicone? I am sure this is a common goop The boat barely leaks it is a small drip from the drain I really do not wnat to remove the dr...

and how do you put it back on after repairing?

How do you remove the drain plug?

the filler material is glass powder i think

Thanks Do you think I can just use the epoxy + hardener+ filler material (instead of the cloth) for the damage on the side of the hull? There is clot...