~~ I have a Hobie 16 mast that has a slight bend in it. I tried to straighten it, no luck... I used it on an Ice boat that I built-- the "Ice shredder...

~~ Yes get SS... and if thats the track for the jib cars ya have to get "COUNTER SUNK" rivt's.... If ya don't use them you won't be able to move yer j...

~~ Their "BLISTERS". I had them on my mono, They are fixable, I didn't fix mine,,, sold the boat instead... Do they have a 'west marine' in PA ???......

~~ This was the only thing I could find on it. ~~~~

~~ The French tried that.... into the Artic. I couldn't find the story but let me see if I can get a pict up here

~~ I'll take easy for the first couple of times. I gotta grow a couple of "KAHUNIAS". I gotta watch for any weak points !! Of course I'll shoot vids...

~~ Who else on here ice sails ??? "HEY DAMON", Can we have a page for us ice sailors???? 😀 (Yes he says, make a donation at the door!!! )~~~ :l...

~~ Lets see if I can do this right ?? Its been awhile !!!! MY DN My new creation.. "Ice shredder"

~~ Do what I did,, Take up ice sailin. Built a DN 2 yrs ago and built a bigger " ice shredder" this past summer... 19' long,,, skate plank is 16' wide...

~~~~~~ 2x10x10 with 2x4 on the sides..... use carriage bolts on the 2x10's through the frame supports, & an old piece of carpet~~~~~

~~ I did this for my 17 & 18 after the snow crushed my 17 hull......(lets see if I can do this right)

~~ I've used that "silcone/camp-dry" spray that ya can get at "wallyworld" It has an orange cap..... I've used it on my tents & righting bags..... wo...

~~ GO PROS ROCK~~ I have 7 of them... 4 normal & 3 wide angle.... The 4 I got off of E-Bay (150 bucks) The wides I got from Go pro store.... The 960 y...

[: What screw up? 😀 Your "Painting The Hobie 18" album is an excellent example of documenting a job like I'm always begging members to do. T...

~~ I just realized thoes links didn't work... "POOP" Go to the photo page---tech tips--- page 2 and look for "owner- Paul" I probably have about...

~~~ Its on one of the links... It was an Interlux paint

~~ GO PROS ROCK~~ I have 7 of them... 4 normal & 3 wide angle.... The 4 I got off of E-Bay (150 bucks) The wides I got from Go pro store.... ...

~~ I tried the 'roll & tip' method. I thought it sucked. Rag full of acetone and took it all off (1/2 of hull), re-prep it then SPRAYED it... Some peo...

DamonLinkous wrote: Can someone hook me up to ride in the passenger basket at the back of the boat? ~~~ I looked it up... I'am in the back of the b...

~~ From what I can see, the AC 45 have 6 for crew... I couldn't find anything for the 'NEW' 72's..... The monos used to have 16 or 17 for crew >>> ar...

~~ Hey bgray, I think you might be wrong about the threaded 'slug' ..... Try a piece of wire to get that back up tp the ''entry spot'' and try inser...

Quarath wrote: Hey popeyez7 That Hobie 17 I was looking at for $300 I ended up getting for free. Still need to get or build a boom and centerboard for...

~~ Check this out>>>>>

~~ Whats it like ??? did ya call him ?? has the trl. been on the road at all ?? ( It might make it hard to get it registered) NY made it hard for ...

~~ I had one of thoes on my 21' Pearson mono... Its for the jib, snap that to the clew, one runs on the port side the other on the starboard.~~

~~ Hey 'riverrat'--- glad to see this old post, it made me laff...... I live on the north shore of Oneida lake in Bernhards Bay. There are 2 guys o...