Try Rick Bliss. Have had good experiences dealing with him. Edited by pknapp66 on Mar 07, 2018 - 03:08 PM.

Lars, On my boat from the end of the strap to the center of the hole is 1.43 cm- 9/16" so a bit more than yours. Best that I can measure from the ...

Lars, I have an end piece of a beam here at my house. There are three bolts that mount each end of the DS strap to the beam. The distance from the ce...

Lars, I will be over at the place where the boat is stored this weekend. Please explain what DS-strap to end of beam means. If DS means dolphin strik...

Lars, Was able to stop by my boat. The measurements that I found doing my best without help are: Distance between hulls under the main beam= 193cm o...

Ad still calls it an 18.

According to the company's website it is a 53 foot gold coast catamaran.

Lars, Probably will get a chance in the next day or two to get out to my boat and will get the measurements if no one else does first. Pete

Hey Pete what does it cost to ship a boat across the country? Pete

That's like 4 points higher than the Tornado I think :boah:

Bill, At Roton you might get the chance to go heads up with 4 other H21's. Rare opportunity.

Yeah Dan I might just have a mast. Since there is no rating you would probably give me like a 20.5 rating in the fleet races. LOL Should I add Taipa...

Hey Ted looks like maybe another 21 for the Roton regatta.Edited by pknapp66 on Jan 26, 2018 - 12:50 PM.

It is 3 hours from me. Very tempting.

I attached several images showing the mast on my camper roof, mast extension, and my long hitch extension with anti sway chains. I borrowed the idea f...

I used to put the mast on top of my slide in camper and can tell you that is is a pain to do. I then built an extension for the front mast stand and w...

Thanks for the response. Just comparing a few boats for possible project.

I would try the place in the link that I added. Also that plate looks identical to the ones on my '76 sailcraft so I assume that it is somewhat of a s...

When I got my Tornado it had plastic rings for the barberhaulers. One of them broke on our initial outing. Replaced them with bullet blocks as suggest...

What I found to repair a small leak in the dagger well of one of my 18's was to put thickened epoxy over the crack and then using a shop vac over the ...

Getting the boat pointed a bit down hill really helps with standing the mast. Pete

Having to buy all of the parts as MN3 stated would be expensive. I believe that this is the boat that I missed out on last year. Then it supposedly ha...

Roton point Multihull Regatta is in Rowayton Conneticut near Norwalk on the Long Island sound. Amazing venue for a regatta. Not always windy but a bea...

We switched over to an old Trailex tilt trailer for the T last year. It has no lift assistance and is no issue for 2 people to tilt the boat. I can do...

Despite some negative reviews on longevity we decided to give one a try on a boat that does not get a lot of use. It is really quite small and does no...

When we first bought our Prindle 16 we bought some parts and the seller included a zippered mesh bag that I had declined to purchase. It was a nice su...

We gained a few seasons on ours by using tire plugs. You can stack several side by side if the crack is still strong enough to support the plugs. Onc...