Ted I was comparing my boat to boats of very similar design, but there may have been a subliminal forgetfulness when it came to leaving out your boat ...

We went ahead and bought an inter 18 spin and tried it on our inter 20. After some experimentation we found using all 3 patches allowed the spin To s...

I thought it was officially 69 boats? Any way you slice it I was on one of the entries. Some really great racing, An awesome dinner and watching the P...

Looks like he has shroud extenders and they appear to really help.

Sponsored by Goslings so free rum as well. Now for the tough decision. Which boat to bring down.

Here are 2 places that sell them. Need to let them know if you have a straight or banana hull boat. Choose other from the manufacturer list. Edited...

According to the ratings a Taipan 4.9 with spin carries an F16 rating. This one does not appear to be equipped with a spin.

Been for sale for a while. Seems like a pretty good deal.

We pull the long rudder pins and remove the rudders as an assembly with the crossbar connected. They fold in half nicely and can be slid under the hik...

The base at Murrays for the carbon mast is $135 and isn't the one that I have with the 3 sheaves on the base. I don't see mine listed. I know about th...

Next time you go to the lake "throw" the mast in the water and look for bubbles. They will show up where it is not sealed. Always a good idea as Hullf...

Like this of course 😀

his will mean the F18 kite is twisted off pretty heavily, with more of a screecher shape. Is this twist due to the top of the spin being so far belo...

I think he is asking if the halyard is strong enough if he cleats it off at the mast base and goes sailing. For the jib murrays has these. I am ...

Another picture of one. Apparently built by Starship Yachts in BC

Must be a regular thing with these boats. Here is one for sale on Long island.

Looks like a pretty good deal. Trailer is extra $100. My concern would be the inspection port in the transom?

Maybe he will ship it.

How to post pictures. Taken from Damon's signature.

curious why they can machine taper sleeves and not taper pins? Are the oversize Hobie pins not available? What size are you looking for? Mcmaster carr...

MN3 wrote: yes throw it in the trash and add a 5" piece of cassette tape to your bridal (one on each side) I guess I need an education from those m...

What style furler are you using? There is a bracket for the Hobie style furler to mount that telocat. You might be able to mount this style on a ronst...

I think that you will find slime works better than fix a flat. If they are badly dry rotted it probably won't work. I got by for a while on my old whe...

My old straight hull had a bracket attached to the front beam and a bolt went through the mast. The banana hull manual seems to skip over raising the ...

The beams on the 21SE are telescopic. Basically a tube inside a tube that slide apart and then they are held into place with large tapered pins that p...

I see the plastic eurotrax wheels are available separately but I only see them from suppliers in Europe. I had a set for my Tornado and really liked t...