Several of us sewed up our own covers out of sunbrella like fabric and use velcro to fasten around the snuffer bag. Some of us remove the spinnaker an...

It is a Chrysler Musketeer.

John, My fleet is hopefully getting smaller. It would look great in your fleet though 😀 We are having our annual multihull regatta at Saratoga l...

Nice looking 570!

Sent a test email

John, Do you feel that you need a full size paddle? We use these telescopic paddles on all of our boats. Much easier to stow. We usually put them und...

Not remembering exactly the position that I was in, I retested trying both positions and the hook will remain attached as long as there is pressure on...

How about this one from Murrays?

Here is the N500. Edited by pknapp66 on Apr 10, 2023 - 06:46 PM.

I just received My Murrays half harness with the MM spreader bar. I have only done a hang test in it so far, but found it easy to put on and surprisin...

John, How about sewing some 1-inch webbing to the tarp and using snap clips to fasten the tarp? Edited by pknapp66 on Feb 05, 2023 - 04:16 PM.

I looked at that. The way the wiring is setup makes this idea problematic... 🙁 If it is just the wiring that keeps you from a 5-minute tongue remov...

The bows of my F16 are a little less than 4 feet from the hitch in drive ready state. No issues when turning. What is the total length of the trailer ...

This is from the Prindle manual. It gives you a 4:1 advantage to better downhaul the main. If you go to page 3 of the technical photo albums, the manu...

JR at H2O Sensations is great, I ordered a couple of parts on Friday/Saturday and they were on my doorstep on Monday. I've ordered quite a bit from hi...

That one won't last long. Really great deal!

Here is a page from the manual. Manual can be found on page 6 of the photo albums under technical. It is likely that you have a P15 mast or at leas...

Turns out that the rocker in the hulls is minimum. The I20 has a fixed self tacking jib track that requires the rear cross bar to be quite a bit highe...

Thanks for the reply. I was thinking there needed to be a little extra room, but maybe I underestimated it. Mine will carry an I20 and F16 on top. Whe...

The SNU is a midpole snuffer and the bag is special to the hoop. I just received one from Jill at Red Gear. Build quality appears to be very good. The...

Dart 18 for sale in Annapolis

Definitely a market for those parts. Who is the builder? That will be important to a potential buyer. Maybe post over at the Tornadocat group as well.

John, It depends a lot on the hull shape. The newer Nacras have a body line high on the hull that makes the foam appear to extend quite far down the ...

Press down firmly on all parts of the top of the hulls, especially in front of the forward crossbar and behind the rear crossbar. If you feel any soft...

My Viper came with cleats mounted vertically to the shroud adjusters to hold the cat trax lines. I have only used these around my yard so far but seem...

Here is the factory manual if it helps out. Also a bunch of pictures. Some show the bottom of the mast. Edited by pknapp66 on Feb 13, 2022 - 02:04...

Something just came to mind. Are you having this issue in heavy air? Nacra offers a stiffer bottom batten for the 6.0 in heavy air to reduce what they...

Pete, the Inter boom is absolutely a good option. On my new rebuild of the 5.8 I have a Inter20 main on an alu Tornado mast together with a self tacki...