Quarath wrote: 3/8 shock cord seems little much for this to me. I'm sure it will work but the same stuff you use for your Trap line returns would be f...

I used 3/8 for both. Works fine. cheap bungee I riveted the pulley you see in my pic above to the cross beam.

It is welded in there, but I could try with a drill press if I can find one to use. The hiking stick rather than being a tube that fits inside the yok...

Thanks for the tip, but the 3205 is the standard yoke on hobie14-21 which is too big. I think I may have the weld broken and try to refab it. Thanks

Sure, why that'd be 1.5 inches !

Figure 8 it is thanks, I did find this reference too. Hobie 16 Tramp Guide

thanks.

Thanks, I think I am starting to see, here is a pic from a catsy install So rather than using a ring on the main rope I'd just tie the shock cord to...

Thanks guys, I have a harken rebuild kit coming, a new lance cleat @ $14 and will start crushing some sheaves !

Hi Robert, I used to live in Columbia...anyway the two holes in the mast step through which the mast step pin goes failed, the screwdriver i put in th...

i'll see if i can find some people to help me. thanks