Thanks MN3, i'll rig it that way to start the season, i was a bit wary of the smoothness with balls but i take your word its useful. Norm

Thanks MN3, i'll rig it that way to start the season, i was a bit wary of the smoothness with balls but i take your word its useful. Norm

Hi Pablom, check the block at the top of the mast, the harken sheave bearing tend to crumble after a few years and under pressure, the sheave is not t...

Hi jgregs, i own a 98 mystere 5.5 based in Quebec City, keep up the work, mysteres are solid and resilient, MN3 gave you solid structural advice with ...

Finally secured some tef-gel in my area, on top of lining a heat shrink jacket above the vinyl coating of wire, it should be good for the next 25 year...

OK, i'll take the wrapping route and good taping above that to secure the spreader, i'll review the surface edge at high magnification to make sure th...

Would you say this is similar or equivalent to tef-gel or Lanicote... Just that its readily available today ...

Thanks for all the good advice. Dogboy i believe that explains well the cable being powdered without any sign of fault (although you can tell it was a...

So heatshrink tubing / tape, no messing with metal surface, these wires are the original ones, that means 23 years of light use... I'll pay attention...

Hi everyone, I’d like to thank you guys for all the high level technical discussions on this forum as it is my first post, particularly MN3, Wolfman, ...

Re-post with working links this time... Hi everyone, I’d like to thank you guys for all the high level technical discussions on this forum as it is m...

This post or thread can be deleted as it was accidentally double posted, go to the most recent one above for answer. Thanks