Here you go, even made it clickable.

Call or email Falcon Marine

A buddy of mine who sails prindle 16 swears by this stuff. It's not cheap.

leeboweffect wrote: My conclusion is that this boat has the shorter, incorrect straps. Comments please. That's possible. On the 5.5, 5.8 and 6.0 th...

nofearofflying wrote: thanx, but doesnt show tiangular chrome/ stainless apparatus/1/4 to1/8 inch in diameter bar, or pulley systems hook up Are you...

If I was just starting out and in the Galveston, Huston area, I'd go over to the Dike, meet some of the group there and catch some rides and see what...

tamumpower1 wrote: Yep, 5.5, 5.8. All the same. Some might have holes cut in the top to reduce windage and give a handle but the profile and everythin...

tamumpower1 wrote: Yep, 5.5, 5.8. All the same. Some might have holes cut in the top to reduce windage and give a handle but the profile and everythin...

Your picture looks like your using the barber hauler cleats too. The barber hauler cleats are used from the high side but are across the boat by the c...

I'm with Philip, leave the mast rotation alone if your new to the boat. Forgetting to uncleat it in a jibe can be very bad as Dogboy said. That said,...

This kinda looks like what was being talked about.

Relative humidity

You can always try, but not recommended.

Some of the H18 guys I knew, dropped the mast with the jib furled, then removed the forestay with jib furled around it from the mast. On the next sail...

I have a Kinder cover also. 10 years outside, it may get another season or two. Harken also makes some nice covers. A friend has one on his Infusion.

I know a guy with a Nacra 5.8 NA painted that way.

I don't think there are any rentals along the Mississippi Gulf Coast any more. Back in the 80's there were several rental places that rented Aqua Cats...

Can't find the results but If I remember correctly, the top 3 were Randy on Sizzor followed by the 2 ARC22's.

afvenom wrote: I am looking at Yale maxibraid+ for the mainsheet I use Yale Maxibraid plus in 5/16 for my mainsheet. It's similar in the hand to po...

Hey, I got an idea, how about a picture of the BOAT.

When distance racing off shore, skipper and crew both have Icom M88 and Garmin 76csx in vest pockets. Does no good on the boat if you go overboard and...

My understanding is that the Inter 18 had a carbon mast, don't know the shape. There are several of those guys on here thou. Maybe one will step up. ...

The Marine fork is one of a kind and comes with a very expensive pin and cotter pin. Here's the similar fork from Murray's for $16.50.

You guys are way overthinking things. Your pull down lines are too long, shorten them and tie a stopper knot or knot and twig ball or stopper ball . ...

That pic was before the main beam was replaced. The reason for the replacement? Corrosion. See the pics below. They are in his album. The post and ...

On a Hobie 16, the mast step sits in the mast base which is riveted to the center of the main beam, the front crossbar of the trampoline frame.