I don't use it on my standing rigging except for the spin pole lines. I do use it as part of the rotater, jib sheet and spin halyard on an F18 and I...

Squirt some goo in it to seal it temporarily. Sail the thing while you have some season left. You've got all winter to make it pretty.

catman42 wrote: For example, say I on a port tack ( the jib is bellowing out to the right ) should I be controlling the in and out function with the l...

Stock was 8:1 The problem with 10 is if you let to much out, it takes a while to get it back in. Got to be very easy with it.

andy354t wrote: Mast and rudder are finished. I need a mast and a rudder blade ...... I am in Winnipeg, 8 hrs north of Minniapolis Andy Rudder ...

I know what you mean with the saltwater in your eyes. She's up front and normally on the wire so she doesn't get the splash we get in the back. I ca...

They aren't goggles but they support several regattas I go to and my wife wears contacts and has switched to them. Check out Sea Specs.

We're in, see you there. Mailed last week.

Guess this Mono is beachable, just can't come and go but on high tide. Edited by nacra55 on Aug 20, 2013 - 10:12 PM.

Philip, I'm with Andrew and Damon on this one. You'd make a good politician with your definition. Load that Corsair on your home-made beach wheels an...

Log in and go to your ad. Scroll down and you should see User Options Add to Watch List Post Comment Report Product Disable Email Updates ...

+3 for the Catalina 22 You've got too much going against you. 1) less than 30 min to rig from trailer to water 2) 4 adults even if they are your size...

The foil pulls up on the hull more than in. On your 5.2, if you went up your bridle wires from the hull 6 inches, chopped the off, put on a foil, you ...

Tough crowd today :-O

F18 Class Rules F.3 MAST F.3.2 DIMENSIONS . SPINNAKER HOIST HEIGHT Shows all the different ways to do the halyard mount So H092 above can be done m...

Pole, 10.5’ - 11', 1.5” OD, 1/16 Thick (sunfish spar) length is a guess I use 11.4 on an F18 Snuffer Hoop and sock Harken Blocks for combined halyard...

On the trailer, I see recommendations to tighten the rig by having a helper hang on the trap line, in order to pull the mast to that side allowing you...

P.M. wrote: Ron, I can mail you my loader. I can get it back at Juana's Thanks Philip, but Gray has a car that needs a home so he can ditch an old ...

Fast is relative.

APS has them priced at $46.03 but back ordered and I need to rebuild several H150 Cam Cleats. Could not find the parts at Defender and APS has them on...

Well, that helped, saved me from ordering the wrong size bearings. Looks like they are 6mm not 5mm. The bearings alone and the loader cost just as m...

Want to know about nacra sails, talk to Skip Elliott. He can tell you more than you will ever want to know. ELLIOTT / PATTISON SAILMAKERS 870 Product...

The problem I had was due to using an ad blocker, when I want to reply to a thread, I turn the ad blocker off.

cezo823 wrote: Assuming that jib halyard tension brings the mast forward like it did on my H16? Thoughts? Thanks No it's not like a 16. The jib do...

Is that Ray B'man's boat? If so, I don't know of anyone faster on a 5.7

windadict wrote: If they induce mast rotaion on boomless boat, what in this case limits or prevents over rotation? 😕 Sheet tension. Boomless boats ...

mummp wrote: . . . do you know if Nacra 5.0 also has breathing holes? Mine hisses when open drain plugs after sailing. No to breathing holes and hiss...

Here we go again, positive rotater vs limiter, boomless vs boom.