just did the rudders on my 5.7 with 4' of 5/16" (cheap stuff from department store) this setup was NOT able to support the weight of the rudders, goin...

i realize this thread is old but since it has already been revived. I would fill through drilled holes using playdoh or something similar i would push...

db51 wrote: This is depressing. Our spring weather SUCKS down here. By now we should normally have at least half our crops planted. Haven't even ...

mummp wrote: UFB!!! I hang by head in shame and frustration . . . Has anybody actually READ this thread from the beginning?? :wallbash: I'm curi...

mummp wrote: What do you use to prevent tiller bars digging into back side of rudders in up position? A short piece of braided vinyl tubing slipped ov...

i've actually been looking to get new bungie for my boat. What length did you need per side? i've got a nacra 5.7 i measured the cord but forgot the m...

Edited by mryella on Feb 09, 2013 - 12:17 PM.

some pictures would go a long way in trying to fix your procedure

manitoba eh 😉

Got it all done finally haha. Thanks guys. Now just have to finish gel coating the rudders. Hey wolfman I have about 500 ml of gelcoat left if you...

posting with chrome now with mac

thanks for all the pointers guys, i already have the heli coils, so i'm probably going to go that route. Ill let you guys know how it goes.

anybody know a richard from virginia haha thanks for the help pbegle, do you know if this richard guy is on the forums?

anybody know a richard from virginia haha thanks for the help pbegle, do you know if this richard guy is on the forums?

My 88 5.7 is a NACA don't have the rest at the moment judging by the info at hand I would say the first part is just the year batch

FlyingDutch wrote: I store my boat similar as you describe. I take all hardware off the mast and boat (a great time to inspect everything and replace ...

hey guys i'm looking at these cradles for my boat namely these ones i have been reading a bit on the forum about the fiberglass bubbling when the car...

Alright guys just a quick update, none of the bolts were seized and came out easily. I have started some of the minor repairs and have completely repa...

Thanks everyone I took a look at the manual and it says they should be 8 3/4" long ill measure them and take a look, I'm just worried about having tho...

HULLFLYER wrote: Put the boat on the trailer and start driving South until you get to central Florida and then start looking for a good place to stay ...