thanks guys, that gives me a good idea ($150-350). The guy up here is asking $400 for faded red hulls but they're supposed to be solid, unpainted and ...

coastrat wrote: what was wrong with the injection? don't be afraid to push it through, you have nothing to lose! I assume water was the main probl...

Are all Prindle 16 hulls made the same (except for the ports on later models) with respect to their attachment to the crossbeams?

😕 Anyone else tried to repair something like this? I've read posts in this forum about people going as far as cutting the top deck off to repair a h...

OK, I just injected two quarts of fiberglass resin into a couple hundred holes in our cat. The soft spots on both rear decks and an area under the tra...

no ports...only my imagination...and what I'm imagining isn't pretty!

Wow...guess I better go buy some epoxy! Just like to clarify one thing though: some people refer to a "foam sandwich construction". Is there a layer ...

Mystere cats were built and sold out of Pointe Calumet, Quebec here in Canada until sometime in the 1990s I believe. They stopped production but I thi...

yeah, that's much better...

🙂 Thanks guys, that makes a lot of sense. I suspected something along those lines. I'll get some line and try that out...

I use www.windguru.cz to plan my windsurfing/cat sailing days and find it surprisingly accurate. Unbelievably, way more accurate than the weather fore...

I had the same problem. I removed the rudder pin gudgeons and siliconed the bolt holes (they go right through the transom). Still have a bit of water...

Wow, Ed, sounds like an invitation for a disaster! I don't know how windy it gets on Simcoe, but if you get a blast like we did the other day your cat...

edchris, I use a full-size cantilever lift that came with the cat. It has a couple side rails to keep it from sliding off, and i was thinking of makin...

Thanks guys, it blew 15 to 25 knots today so I opted to windsurf instead. Actually, a storm blew in this evening with a 50+ knot sideshore blast that ...

check this post: The photos helped me get mine rigged properly. The rudders are impossible to pull up if you don't use the pulleys properly.

OK, maybe i've been pulling from the side a bit since i raise the sail with the cat on a boat lift. Regardless i still need two sheaves. Murray's has...

OK, maybe i've been pulling from the side a bit since i raise the sail with the cat on a boat lift. Regardless i still need two sheaves. Murray's has...

thanks for all your input guys. I decided to take the boat to a nearby catamaran club and spent 4 hours with the owner/instructor. She has 30 years of...

ok now i see it - it's on a badly faded and barely legible caution sticker, about a foot up from the base.