Xmas version - Nacra 5.2

Mac, I did end up taking it to Joe (he is a very nice guy). I remembered he put a zipper in my jib a while back. He also said he use to sail a Nacr...

Not sure of the material. It's the original sail from my '77 Nacra.

Do you have the main traveller car FS?

Ed, It looked like what you described, a single decal cut and placed as in the pic. I would be very greatful if you have an extra set laying aroun...

Thanks Jeff. A good buddy of mine taught me the "roll and tip" method. We sanded the hulls with 80 grit paper, fixed a couple spots with 610 epoxy...

Great to hear there are a few cat sailors around here. We should all get together some windy day.

I used "roll and tip" as well. Just finished bottoms.

Power washer.

My 77' Nacra had been sitting for 20+ years and it cleaned up nicely. However the sails were dry and the tramp was intack.

Andrew is right. Shackle fiddle side to wire, shackle dogbone/can't miss to other end, tie bungee to dogbone end.

Sorry for the crazy background. These came off my '77 5.2.

Yikes. Scarry. Glad you made it back unharmed.

This one hurts. Go to about 4:17 and watch her get crunched.

I would like to buy a set of large red or blue set and also the red 5.2 sticker and one of the blue ones with the sillouette on it. PM me and I'll pa...

Please post pics of the front tramp after and during fabrication.

Pete, That front tramp you see in the pics is from a Hobie Gateaway we sailed in Jamaica. Lots of fun in 30kts.

Nice boat. I noticed the tramp is a newer/replacment with the slits for the jib blocks. I am curious as to your future graphics. I eventually want ...

Here is a pic of the hole/channel thru the bulkhead in my 5.2. It could easilt get clogged. You could use a fishing tool for running wires in a wall...

One of you saws "bows" into wind the other says "mast" into wind. Which?

BTW the captain steered with his foot the whole time.

I like thoes sails on your '75 Hobie.