Stiletto did this on their 27' cat trailers.

There's an 83 Prindle 18 in the classifieds right now.

Where are you located?

If you're going there, stay here. Cat friendly.

No affiliation. Edited by gahamby on Feb 09, 2020 - 08:38 PM.

Weigh the hull and compare that figure to the specification weight. Those boats don't dry out and they don't open up very well. They're made like an I...

And we're off topic.

Once you paint it you're married to that formula of paint.

I have a 6'-0" front mast support that I rigged a telescoping extension into. This makes the angle of the lift line deep enough to lift the mast. It's...

First, get the SC19! It's a great boat! Inspect the standing rigging closely. Consider replacing all of it. I've sailed with 3 SC19 owners. They all ...

I'll read a little closer next time. Yes it's on a trailer, no you don't have titles Duh. I just donated a boat. I needed titles for boat and trailer....

Welcome, Sol Cats are a niche market. Post some pics and tell us where it is. Rudders and center boards are popular. There's always the donation route...

I tow with a GMC 2500 Sportsmobile conversion. The current front mast support keeps the mast above the pop top roof when it's in the down position. If...

Indoor/outdoor carpet good side in. Whack it together with grommets or get a carpet shop to sew it for you.

Those inspection ports indicate that a repair had to be made to the gudgeon bolt attachment plates.

Super Cat hulls are foam cored. Edited by gahamby on Aug 03, 2019 - 10:15 PM.

Hobie quotes it at 17'

Pretty much what Dan said. There is a SC 17 in the classifieds on this site. There is a SC 17 on the market in Warrington VA. It might be sold. If you...

Totally unbiased opinion, Super Cat 15 or 17.Edited by gahamby on Jul 08, 2019 - 06:31 PM.

There is supposed to be a "V" hook of some sort at the top that catches the swedge.

I coil em up and put them into the after mast support and hold em with a bungee cord. I close the Hyfield levers and pin them shut.

With cats not so much the weight as the windage.

The trouble with heat in this situation is that aluminum dissipates the heat so damn quick.

Is the tramp removed and the dolphin striker loosened? If you can, turn the boat upside down, and put a bunch of PB Blaster in the castings. Let it so...

I seldom if ever launch from a beach. My motivation here is getting in and out of tight channels or getting home in a flat calm. I am quite experience...

Here's a link to how I did it on my SC15. I don't know how it would work if you have a front tramp.

Searching "boat trailers" on Craig's List hasn't returned any results?