the broken bolt was removed with a bolt extractor drill after soaking overnight in LiquidWrench. I removed the tramp and flipped the crossbar upsided...

thanks Matt, ill check the thread depth! I got the crossbar off, tramp and dolphin still attached, then drilled out the broken bolt, applied the bolt...

>removing the crossbar today, so i can work on the broken inboard bolt.

So i removed the INBOARD hex bolt from the other hull. I found that the bolt from the parts box I was trying to thread up into the casting was an inch...

the boat was missing the outer hex bolt and under lip channel. I found both in a box of spare parts. I put the channel under the lip and started push...

thanks, exactly what I was looking for. I didn't want to go too far with removing parts unnecessarily. So if I loosen the dolphin striker, then the o...

wow