I purchased my drysuit from Mythic Gear br /> Good quality at a reasonable price.

Todd, there is an active fleet in Virginia Beach (Hobie Fleet 32). A bit of a haul from Williamsburg, but if interested PM me. Most of the fleet kee...

Yes, I’m sailing a SLO designed square top with the foot of the sail modified to account for a boomlet clew. I do not know the original EP main sail ...

Pairajacks, my club uses a multiplier of 0.995 to my Nacra 5.8 rating to account for my squaretop.

Here's the image. (I posted originally using my tablet and did not find a "copy image address" option.) One thing I forgot to mention is that the wo...

Here's a picture with the arm pointing forward. This arrangement enables over-rotation of the mast (>90 degrees) when on a broad reach. Also shown i...

Update: I replaced the original pivmatics with the CL257 and they work well. However it is worth noting that the CL257 does not include a fairlead (...

Here's a picture. The blue halyard exits the bottom of the mast and will be passed around the small block on the front beam immediately below the mas...

TBYCats, based on your description it sounds like you have mistakenly passed the halyard out through a drain hole. Instead you should pass the halyar...

Thanks for information. One of the ears broke at the pin. I will use my drimmel to shorten the piece and drill new pin holes, but I ordered the new...

If you have a mast rotator, the jib sheet might still get snagged with the preventer rigged as shown in the picture submitted by Edchris. I solved th...

I purchased a new mylar main and dacron jib from SLO Sail and Canvas in May and am very happy with the performance, look and customer service.