A safer design already exist.

With an helicoil you keep the same size bolt. They provide a special tap that is larger than the bolt to compensate for the coil. The solution you u...

Helicoil insert if it's only the thread that are stripped and the hole is not enlarged. Those are especially made for that. Very easy to install. A...

You're absolutely right. English is not my mother tongue. After reading your last post I re-read David post twice and now i got the meaning. Sorry ...

That foam is way too soft for that kind of repair. I don't know for your cat but mine has only one layer of I would say a 6 oz cloth as the exterior ...

As for the gelcoat drying between coat. Buy laminating gelcoat. It won't fully cure and will remain tacky so you will not have to sand between coat....

I really know nothing about boomless rig but the rear beam look too much forward if we compare it to the 5.5SL in the classified. Maybe the angle of ...

The only FWD in sailing that I know Is: Would it be their logo you saw on the sail^

If you remove the handle and slide it in the shorter direction maybe the hard stop will get out the outer tube and you will be able to remove it.

Edchris, Yes, my problem is 100% resolved. Since I bought the aussie ring and attached it the way Aquarius Sail showed in the link provided by Gaham...

Too late, it's already gone. We saw it on a trailer on our way there. Too bad.

Edchris177 wrote: You probably NEED that cat! That won't help Edchris. I'm trying to convince myself otherwise. 😉

I didn't post the pics of the P19. I just post the location of the lake where we are going. Here's the link to the ad.

I wouldn't too but the hulls look in pretty good shape on the pictures and it seem to have everything but the boom. I will know in a few days since w...

MN3 wrote: i would think $2500 - 4000 range - a bit more with a spin setup That's in line with wath I tought. At $750.00 the sails and the tramp n...

How would it worth if it is in good shape? thank you,

Sorry, I should have search before posting. I found out. Larger main and jib with compression tube to lower the jib tack. Upgraded rudders. Is the...

Great Bacho, thank you. I will check the next time I rig my cat but It looks pretty much the same. Thank you,

Jason, They have a database of dimensions. They didn't need my jib to make the new one. Now, do they have yours?

Jason, I bought the jib for my Inter 18 at Voiles Saintonge in Granby, QC. They made it themselves. It is in dacron but they could probably do it i...

Been sucessful today. Bought the aussie ring and attached it the way shown in gahamby link (aquarius sail). Had some problem the first time. I thin...

Okay, thank you Bacho.

MN3 wrote: you can't go 90* on a boat with side stays (shrouds) You're right. I forgot about the side stays. I will check how long I need to reach ...