I have removed one of front the top deck on my Inter 18 last year. It was not glued properly at the front end, just like your's but less obvious. It...

I can't say all but certainly the majority of car with automatic transmission have a transmission oil cooler. It is usually inside the bottom reservo...

I would sand those area smooth. I was looking at installing that on my Inter 18 but was wondering about the ease of installation close to the cross b...

I was asking because I had 2 inter 18. One I sold in july and I still have one. I'm looking for something smaller since I'm most of the time solo.

It look pretty much like an Inter 18. What are the differences?

Since yestersday there's a Gcat 6.1m for sale in this site cassified ads. Is that what you're looking for?

Not a Nacra but a Mystere 5.0 XL

That is $5500 CDN. It's one of my Inter 18.

-Edited by coolhead on Mar 16, 2016 - 08:35 AM.

Could this have been done by flying objects pushed by the wind? have you had strong storms?

Misha Heemskerk & Glen Ashby boat where not boomless but the boom was offset to one side of the sail to let it go down to the tramp.

At my club, my cat and about fifteen other cats are passing the winter mast up and I've never eard of any problem. Personnally, i remove the trampoli...

If the hulls are symetrical I would use the other hull to make a mold. Then I would cut off all the broken fiberglass from that hull. I would then a...

Your title say 5.2 but the ad say 5.8

First, what I describe happen mainly with polyester resin. Vinylester has better resistance to that as well as epoxy because they are more permeable ...

Usually when there's blistering the fiberglass underneat the gelcoat is kind of rotten under the blisters. On a solid fiberglass boat it's not that b...

A) you have 800lb of water in your hulls. Maybe that's why he find it so difficult to move.

George, Unfortunatetly the mast on both my Inter 18 are aluminum. As you suggest I will contact Nacra to get numbers on that. Thank you,

coolhead wrote: It looks like "404 not found" Works great now. Thank you for the feed.

It looks like "404 not found"

nacra55 wrote: What are you trying to do? Trying to learn to sail properly. I learned about those 2 type of bend this winter reading books and was c...