2nd trip out on the Prindle 19 it was gusting to 17, we went on a close haul all the way across Burt Lake (Northern Mi..LP) about 9 miles..after comin...

and mine

Go to carl2 album

K..will do..hopefully later today

okay guys thanks for all the responses I put the shortened Murray's pigtail on .the rolling furler attached to the bridles.the rest was same as.the mu...

will the setup work just by adding a block to the bridle.. seems like it would pull the bridle back

nice boats aren't they!.. our sails are exact opposites. I'm now building a double stack trailer, the prindle 19 on the bottom & the 450 on the top. ...

probably stiffed the marina?...... 🙄

took the 450 Nacra out in 25 mph gusts after being challenged by the brother in law..so I told him I would if he would use our 26 foot pontoon boat as...

from the front of the dolphin striker to the center of the rear beam 92.5

I bought a 19 last month..took it to a small lake for its maiden , wind was around 12 - 15.. My buddy & I were only going but then.. my neighbor pops...

"What about that pink sail? Wow. Is everyone gonna laugh at me? icon_confused " I actually think it looks pretty cool get it while it is still Octob...

"Looks like you have have some cool toys at your disposal!"..Im in automotive design,whenever there is room in the tank I get to add stuff. 😎 Im ...

here is the printed bushings..more on the fit into the cross bar later 😉 was going to use 6mm clevis pins but went back to the 1/4-20 hex bolt with...

Thx Bob.. The kit was already on the Prindle that I bought but one spring was missing and they were not utilizing the extra spacers.. I'm using the sa...

arch wrote: first, we should know what make and model your boat is? they differ greatly. j According to the manual they dont differ greatly.Ther is a...

I'm in need of a system as well ..I've got a 1986 P19 & am following this thread. Im vertically challenged at 5"4 & have a bad back. I've got an EZ up...

I've just acquired a Prindle 19..the EZ step instructions say that you can put a "simple block & tackle between the lift strap ring on the top of the ...