rodgers wrote: I had a diamond wire break with 3 ppl on the boat in strong wind and the mast did not break. It was on a H18 SX i think they are calle...

To clarify the dent is 4 FEET from the bottom of mast, if it were 4" and I would just send it 😎

popeyez7 wrote: ~~ I have 2 MAG Mast's sold my 18 years ago ~~ Awesome! It’s a magnum, I’ll shoot you a PM. Thank you! Interesting enough, the sell...

pknapp66 wrote: Last year before I sold the H18 I put the rig on the 21 and it was just about perfect for my needs, other than the 10’ trailer width a...

Try this /a> Go to brokerage using button on left hand side... btw, this is where I go to drool over Corsairs.

I always thought modifying getaway wings would be the easiest solution to add wings to any cat. Someone has done it with this hobie 20 /a>

My kids are turning 3 and 5 so the 21 is a bit much to handle with them on board, I figured until they get older the Getaway would be fun and safe. Al...

MN3 wrote: 2. you could easily purchase some 4mm dynema and make a temp forestay if all else fails. This is a great idea, defender marine is just do...

Looking at it again today I’m certain there’s too much rake. I have hardware to extends shrouds but run out of adjustment trying to tension the forest...

Fixed pictures

jack108136 wrote: That's why I want to scan my Multihulls Magazine collection. I vaguely remember several articles about the Firefly One about a rac...

Makes a lot of sense about the angle of sail and what these boats were designed for, either way the day was fun as hell and I’m satisfied with the old...

Thanks I’ll check out the Hobie forums for tuning advice. The boat came with 2 sets of Calvert sails that are in decent shape, the gray sails seem alm...

MN3 wrote: Yes. But from what I understand you need to also mod the main halyard to reef. Have not got that far yet; still working on extending the tr...

dssaak wrote: One of the guys we sail with has an H21 with a square top main. I have been on it many times. It is a very powerful boat both before a...

I didn’t get it from Mike, I got it from a guy who only had it a short time. I live in glastonbury, CT but plan on keeping it at Spicers Marina in Noa...

Thanks guys, I’m really happy with how it came out. I got the boat on water and it is solid, no movement at all between the crossbars. Also, wow this...

I’m not able to find taper pins in size I need so I’ve come up with a solution using a large bolt and some tapered sleeves I can have turned at work. ...

Larger Taper pins and shims under the bearing strap sounds like a good solution to tighten everything up and keep the telescoping beam functional.

Thanks for all the help guys, I finally got some time to take boat apart to see what was going on. It looks as if the taper pin holes are quite worn b...

I was planning on making two loops using wire rope so I could raise the attachment point for trap and bridle wires to prevent retensioning mid lift as...