Scott did you sand off the old non skid or just roll over it?

This is why you always want weather helm. and Never cleat in on a gusy day Assuming you are doing everything else right that alone could save...

X2 on the angle cut

headhunter best boat name ever.

Quarath wrote: n Maybe I need to look at a little more hard core repair here. I considering just sanding it down ot the glass and putting a couple mo...

Zach, my rear crossmember has 2 holes already centered in it, the guy added the pipe and drilled 2 holes to match. He used really long bolts to secu...

Here is what I learned and now am afraid of.... Last october I picked up my P16 and I was just about putting all my weight on palms pressing on the ...

@Tom My mast support in the front is a bow stop from a trailer bolted to 2x3 box tube and one of the old style not made anymore round plastic mast h...

So when making sure that my simple fix was in deed simple....I delaminated from 2 feet from the crossbar forward to darn near the point of the bow. I ...

Maybe I'm showing my age here but whats VHS tape?....J/K seriously tho good use of old technology. Guess I'll have to give dear old dad a call lat...

Tom, I have a 25+ year old trailer that is half aluminum half galvanized but real solid. I went with a roll on coat of water based rustoleum primer...

Does anyone use anything for buoyancy in the case of a catastrophic hull failure? I've seen pool noodles and soda bottles used in the past but I've n...

Read into what you need a little more but it looks like you are good to go using 406. Depending on your skill with epoxy and a sander you may want to ...

DO NOT LAY IT IN THICK It will melt your boat or the port or both look online for the manual, i think its free if not Ill help you out

Check the West manual Figure 19 p9 "creating a base" I'm no expert but the thickened stuff is pretty easy to work with. Go with some 406 for strengt...

For me it was a mixed bag, I got crossbar bolts and rudder bolts all bent. I'd say 50/50 on useable vs junk but I got some stuff that would be expensi...

Hey good luck on the restoration, tdive on ebay.... send him a message if you don't see what you want. I asked for some stuff and he created a listi...

I've got the same issue, please take some pics and post them

on my list of things to pick up tomorrow. Drummer's post on OptiKid's question directed me to the Harbor freight website for the compressor driven one...

Congrats on the new ride!

This is how I got over it, Took 1/2 day today and since I wasn't driving to MD and it was too humid (rain) to epoxy and sand outside I decided to: p...

New tires are pretty expensive keep that in mind.

The seller responded to me on Sunday afternoon and said they were available, I said I can get there on Friday and he sold them out from under me they ...

wheels $50 2 tanks of gas $120 tolls $20 1 day of time I think I'm still in the black...

In keeping with the theme of a free beach cat isn't.... I borrowed a caliper from my grandfather to compare the size of the rudder blades...which I'l...

Why not just add a pair of sleigh runner? and use a set of trailing rudder runners Like a backwards bob sled. But then I think you would need to hav...