Contact Murray's again, i think they are carrying an alternate beam end cap. Here's the part # 56-2503 Tell them Chiindii Windsports sent you.

We will see you there Pete!

PM me, I have a hot stick ill sell you cheap. And I sail a 5.0 and may be able to help you with your boat.

.a boom, mast rotator and/or a barberhauler on a NACRA5.0...are you kidding me? If racing in winds under 5 mph, no, not kidding. If your there to ra...

I used to have a 5.7 and now have a 5.0. I'm still figuring out the 5.0. I cant say that I completely figured out the 5.7, especially with Dacron sai...

Ive already got to line racing sheet on order, I will do as you suggest with the robline. Thanks.

Yea, both tacs, sounds like its prevailant on the 5.0. I haven't been able to take the mast back much yet. Next time out I will. Might be best to add ...

Phillip, how about end splicing to line racing sheet to dynema 12 strand for a spin haulyard?

Bob M and Bob V, are you both doing the Tripoint this year? Chumms just chimed in and is changing the tires on the N20 trailer as we speak. He'll have...

I have a 5.0 also, and have lee helm. Its a little freaky at times. in over 7-8 mph winds, my shoulder gets a bit tired from pushing on the tiller. Re...

I sailed a N6.0 Mylar sq top, self tacking jib, for 3 years. A buddie of mine got a Bimare 18HT and could out point me by about 7 degrees in lite wind...

I have a N6.0 with a spin on it that ive been running for a couple years now. End pole snuffer, 2"alum pole, self tacker(smaller jib, very nice with s...

looks like the tack of the Main should be fed into the luff track and some downhaul added. The Main Blocks shouldn't push the Tack forward of the mast...

Looks like the wrong Batten Cap. Try one of these; br /> OR THIS

Me three! I own a N6.0, great boat. Square top main, self tacking and furling Jib, Spin with raised bowfoil and lowered rear spin pole attachment, al...

Andrew, I had SLO build me a main for my N5.7 a year and a half ago. im no expert, but the sail seemed very well constructed and performed well also. ...

What is the difference between the original 6.0 mast and the NA? I thought the NA was just a bigger jib and jib foil. The na has a thicker wall thick...

smfinley wrote: Most every manufacturer will CYA and not recommend modifying their tested design in any way. The question becomes how big a safety fa...

I just happen to have a NACRA 5.7 for sale. Where are you located. I have gonre through this boat thoroughly, it is beautiful. I am going to look fo...

In the early '80's I owned a Hobie 16, had a lot of fun on that boat. Easy to sail, Stuffed the bows a hundred times. sold it in the late 80's and thr...