klozhald wrote: Are you sure you weren't bottoming the tube out in the inside layer of glass? I couldn't get anywhere with injecting it till I cut the...

dtfuqua wrote: The syringes I found that work pretty good are the "feeding tube" syringes where medical people put the liquid supplement directly into...

I'll probably end up with something like that for my H17 but it will just across the beams of me P18. An 8 ft sec of 2x6 pressure treated lumbar then ...

Some cradle are made for specific boat hulls but other are more generic and usually bigger. Ill have to to take a pic of what I rigged on my beach wh...

I ran into another problem this weekend. in fixing my soft spot. I had mistakenly drilled clear through in several spots. I was able to fix this easy ...

Hal if your keeping them on the beach somewhere and not moving them around you can just seal them in for teh season with some good silicone. If you pl...

I posted the link to here to whatever is on the craigstlist site.

Well it actually looks like I will not quite be able to reach it from inside the port so I will have to do it blind from the outside. I will get a goo...

I posted this on the Hobie and the Catsailor forums as well so hopefully someone will spot it.

I have not tried yet find it from the inside yet but based on it's location I think there is a good chance that it can be reached this way if my arms ...

Water is still very cold here and I don't have a wetsuit that will fit me 🙁 so I might as well work on it.

On mine you can see in the pic above that pretty much all the gelcoat is worn off of the center section of the keels.

Don't know if it is Prindle specific or not but I can get a lot of weather helm if I travel out too much going downwind. If I bring it in some it ease...

pbegle wrote: Sorry, I meant flour dough, sawdust, any type of cheap filler to fill holes. If it's a serious hole , then cover with couple layers of ...

pbegle wrote: The cheapest. Try floor dough. Pete Ok, never heard of it what is it and where do you get it? google didn't give me much I don't min...

Gonna be doing this with wests soon on my H17. Today though i screwed up and have several holes that went all the way through. I was using a bit stop ...

I had always thought some sort of floating dock that could have some sort of a ramp on one side would be great for a cat. I really like what you came ...

Getaways still bring a pretty good price if they are in good shape. I see some for less than 5 and some for more. They are a newer style boat and are ...

They are somewhat tank like aren't theyEdited by Quarath on Apr 02, 2012 - 11:51 PM.

No welding skills here. I wish I did it would help a lot. My Neighbor can but I all ready bug him for a lot of stuff he can do for me at his work. My ...

The moss makes me think they may be a little weak. LOL.. That would make me a little worried as well. I was picturing severe fading and dirty on the ...

Damon do you have source for Black Beauties. I have found that they can be very difficult to come by? I really don't like the Red/green ones that much

I just took my trailer on a rod trip to pick up a couple boats and the wife pulled into a gas pump a little sharp and bent a 2 in crossbar back about ...

I do what he said. I am considering finding a bolt with an allen wrench socket to replace with but have not done so yet.

Are sails in one piece or full of holes. If they are just Ugly from fading but the stitching and fabric ok then you can at least give them a try and s...

I am but I turned the P18 over the other day to find a nasty ding that is into the glass that I think I am going to have to give some attention to.