I found it at murrys these look cool so I hope they are worth the trouble

Do you reallly want a mamma bob? hobies should float on their side just fine if the mast is sealed and adding all that weight to the top of the mast w...

I just got a prindle 18-2 and am looking for a very specific model hatch with a flip up handle. I could use a standard one like pictured above but was...

unfortunately not the one I am looking for. I would like a 6" round hatch with a handle that pops up to open the hatch or lays flat in a countersink. ...

Hey guys what all do I need to get my sticker for over night parking? I will be sailing my H16 for the next month or so till I am done rebuildin...

my onw little words of wisdom... the easiest way to keep control of the mast is to keep it as close to your chest as possible. This is especially t...

Hey Andrew thanks for the heads up. I have heard of him but never been there. Dave was just telling me thay can make everything I need and the prices...

P.S. I already have to manual and tuning guide but these don't seem to mention line lenghts

I got the guy down to $700 so the deal is looking too good to pass up even if I have to put another $500 or so in it. On that note, anyone know where ...

Since your jib will replace the forestay any way, you can add a chainplate to it to get it connected then run up your jib and reconnect the forestay r...

Duh, I just re-read your post and I used vice grips to lock on to the heads to get them started. The good news is even if one breaks off, there is en...

if you are talking about the delrin screws in the castings, the best i can recommend is to drill them out then take a mini-torch to whats left and cha...

There is nothing better then taking something old and breathing new life into it again!!! I just rebuilt an 87 hobie 16 and right now she is as good a...

If you dont feel like dropping the $80 (if you already have an air compressor that is)feel free to use mine. And yes, I have a harbor freight about...

P.S. from Murrys | Item No Description Qty BackOrder Qty Ship Price/Unit Ext.Price | |_____________________________________________...

I wonder if that is my issue as well??? If you have seen the bad kitty rebuild in the tech gallery, you can see where I just installed the new metal b...

HObie does use stainless steel rivets with cups (you can check the parts list and order from murrys) and yes stainless to aluminum can be an issue but...

I just built a set of trax with cradles and 6 tires for under $70. I will test this weekend and if they work well (which they should!!!) then i will p...

here is something I found helpful for my old H18SX with mamma bob. Go to the your favorite home improvement store and but 3 8ft sections of pvc pipe a...

I am shocked that no one even didi a basic "what if the skipper falls off" before leaving the beach. It is one thing to risk your own life but to b...

I am guessing it was a microburst that blew out my jib but what sucked the boat under still has me baffled. The spouts were a couple of miles away so ...

Hey Andrew you must be a brother from another mother or something. When we got bored on the beach, we would strap chair cusions to windsurfer ma...

Anybody seen one of these cats??? with a speed of 32k, I am guessing it can pull a few skiers

got a pic< would love to see it

If you hold onto the high hull after you get knocked down, this will force the mast to sink much quicker, it is a good idea to get down off the high h...