Hullflyer, Check your PM Thanks

I’m moving to Waverly Hall next week. Boat is already here. I originally was looking for something on the coast for those weekend get always. Howe...

Hey everyone, Thanks for your input. It would appear that going down would be futile to say the least. Does anyone have better opinions on West Poi...

Yeah, I’ll send somebody to pick it up Signed Nigeria

Try Boat US

MN3 wrote: I have used those for years - yes they are easier to get on they are also a million times easier to snag on a line, sail, shorts, shirt, p...

Silly guy. The wind gods of course 😀

It’s quite clear what happen They had a sweet ride

Not much to wash and polish

Call your county parks department if so owned and ask for someone up the pecking order and try that route. Point out, that this is a potential liabil...

If concerned as to hitting the bottom or unsure of the depth, I mark my boards just a little shallower than the rudders. Hence the rudders will kick ...

This sounds like a cry for an Old G-Cat 😉

Jonathan, Take that piece of sewer pipe you cut off for your sail tube and cut about a 8-10" piece off and use that as the cradle. Notch the botto...

catsalor wrote: I guess carry on as if there is no pandemic?YOU NEED TOO STAY HOME especially being on the front lines you should know better!!!!!...

Adding to the discussion, you might consider an orange ball cap like hunters wear in the woods.br /> Seen above the water and many styles depending o...

MN3 wrote: HI Forrest - thanks for the input i have round files that are pretty similar to the rat tail ones you show - as per the dremel ... i am a ...

Or use a wielding rod with a Dremel barrel sander head on the end. Use the Dremal for power and reach down and sand it that way

MN3 wrote: i doubt it - if i can put that patch there i could put glass the issue is really sanding it down afterwords Andrew What about the use of...

Caution when using on legs - i used this one time on my legs and slipped right off my cat in a strong gybe (pretty sharky part of the gulf too - right...

Caution when using on legs - i used this one time on my legs and slipped right off my cat in a strong gybe (pretty sharky part of the gulf too - right...

tnell wrote: millcreek I was talking to an inexperienced rep. 10 minutes later another rep called me back and said I'm covered Updated post. Than...

MN3 wrote: word of caution here... you can pay for $20,000 worth of insurance on your boat but if it is destroyed... (I THINK) your gonna get blue bo...

MN3 wrote: word of caution here... you can pay for $20,000 worth of insurance on your boat but if it is destroyed... (I THINK) your gonna get blue bo...

tnell wrote: Short answer Racing EXCLUDED with USAA USAA Policy HO3 1. Coverage E - Personal Liability and Coverage F - Medical Payments to Othe...

JohnES wrote: I pay about $90.00 per year... Keep in mind; when towing your boat it is covered by your auto policy, when stored your homeowners kick...

I just lay them on the tramp and tie to the mast.

Edchris177 wrote: Do you have a preventer? Run a piece of 1/4" bungee from the outside of the front beam-through the bottom of the diamond wires-over ...

Allow me to make a suggestion. What if you contacted an insulation contractor in your area that does liquid injectable insulation They could stick...