That’s a pretty good sail, in what, six days? - Yes 2600 miles is a lot of water. I suppose if you had the time though...

pbegle wrote: Have those two Harken cleat set screws, Kevin. Send me your address. Pete PM sent. no need to go through any trouble though.

just curious - why? what extra challenges did this create? Historically the lake fluctuates 6ft. Right now its near its peak. 2012 it was near its re...

jalex wrote: Glad to hear of the welcoming locals. I didn't really have such luck in the Keys. Maybe I'll trailer up to the Great Lakes next time You...

I had thought about that. It would certainly be stronger. I was worried about compensating for mast bend, tightening it enough that it would take weig...

looks good except that hook I actually crimped that hook. so its captive around the cable. Just need to loosen turnbuckle all the way to remove. I th...

Well it isn't elegant, but it should help. Plus I didn't have to drill any holes in the boat which I like. 1/8" stainless cable jacketed. With extra ...

I've seen the pictures! good luck! keep us posted with pictures. Nothing insightful to add beyond that. My biggest question would be wheres the mast?

I admire your optimism! Don't let the naysayers talk you out of it. However, Your picture's links wont work for me so I'm not sure what you're working...

Every time SuperCat comes up they say there's a big following. Does no one know the hull construction type?

Your wings look stout! I like the hiking strap. That's a good thought on wallowing out the crossbeam. Ill try and come up with something. As for the c...

Sorry for the confusion and thanks for the help in advance. The break is at 'A'. and im looking to add a tube from 'B' to my brothers big toe on that ...

I don’t have a picture of the failure. Plus what’s done is done. The fabricator already has the wing. Question is will adding another support from the...

I never considered what those pulleys on my 6.0 foil were for. Thank you. I just use that cleat on the cross bar for the furling line. Do you think th...

Looks like a fun route. Maybe next year!

No parts, no support, old boats, 35k budget for new boat. Only one of those stopping people from signing up for worrell 1000. Else, I think the Hobie ...

I wish they would have kept sailing north I was enjoying tracking their progress through each stage. I would love to partake in something like this bu...

I saw the onboard footage of team Australia posted today or yesterday. I thought the F20 FCS was a foiling boat?

That's some pretty good advice. Just get out there and sail it until it breaks. I like that. How far does your main get? See picture. Almost all t...

Years ago in the early 2000s I used to work at a scout camp for a summer as a counselor, and the lakefront area had a small selection of boats you co...

Right so with hooked main, apply T to main sail and T is applied to mast. With 1:1 Halyard T is applied to mainsail and 2T is applied to mast. In your...

MN3: I didn't think of the additional 2:1 on the downhaul with the reefed main. That's a good point. I'm not sure I fully understand the effects othe...

I too am considering a new main for my '99 Nacra 6.0 NA so let me know what kind of pricing you come across. My brother has emailed a few manufacturer...

I too am considering a new main for my '99 Nacra 6.0 NA so let me know what kind of pricing you come across. My brother has emailed a few manufacturer...

What are you asking exactly?