I have a set with the newer rudder gudgeons you would need as well

You need to seal more than the rivets I also seal around the mast tang, mast base, mast head and any other place that may have a through mast fitting....

I have a NACRA 6.0 NA (20 ft) for sale and I am in Delray Beach Fl 33444 Will be posting it on this site when I take some photos this weekend

I am parting out a H18 check out ads this sitebruiser wrote: Our Hobie 18 Fleet is building nicely at the Rudder Club. We had 7 this past weekend turn...

nohuhu wrote: I would think not, Flyer. I sail both boats and know the booms are different lengths. Wish I could get a set for my P18, out here o...

Cheata motor mount is still the best If when you return home and its blowing 15+ do you think a drill will get you home Will it still work when a few ...

It does not have to be one or the other it can be both

Place the 5.5 mast on top of T mast so the mast hounds line up. Then cut top and bottom

Your 76 Nacra is a glass layup boat not foam sandwich so it will not have the delamination problems of the foam sandwich constructiondmgbear55 wrote: ...

You will need to check the luff length. The 5.8 is a 19 foot boat and a F18 is an 18 foot boat. I'm sure the mast lengths are different. The F18 sail ...

Maybe donate the Prindle to a youth sailing program in your area

Both were common problems as the boats got older. The first boats were glass layup construction and later were foam sandwich

Even the first one built only had the 2 behind the rear beam. The other indicate there were issues with the boat. Most likely were dagger board well l...

How many ports are in that boat? Nacras only came with one on each hull behind the rear beamtamumpower1 wrote: Theres a dude selling non contoured one...

The answer is YES

Try washing your sails every now and then

Prindle 15-16-classic 18 all have the same rudders Prindle 18/2-and P19 use a different rudder They may appear to be the same but they are not The dis...

You can also go back to the original main halyard system, half wire and half line Easy enough to make The newer style seems to have a shorter life sp...

There are 2 different styles of rudders for the P19 and P18/2 The second generation rudders are the ones with the rounded tips which also came with di...

That does not look like an original Hull ID Nacra always stamped them on the hull almost always on the top outboard starboard portion of the deck be...

I suggest you download the manual it will help

You will not need a boom as it is a boom less rig

Both the 18 and 18/2 came with pin head sails. I see no reason you can not use the square top as both 18 amd 18/2 use the same mast

The nacra 5.8 is a 19 foot boat, the mast is taller the jib will not work on a 18/2 if the nacra 5,8 is a NA 5.8 the jib is huge. Neither will work on...

Suggestion put carpet strips around upper and lower rim of dagger board wells

As I have posted before, I would advise against using factory made wires for many boats. A lot of manufactures have begun using cheap SS Wire Rope fro...

Important question What is a few years old? What year is the boat?

First of all you will have to shorten the forestay to accommodate the roller fitting at the top of the forestay and the roller furler at the bottom. T...

If you can get a new main sail for $500 I would buy it I would expect he cost to be around $1000