Are you sure that it is the proper plunger? The Hobie 18 plunger is different from the Hobie 16 plunger. The H-18 is a different shape, more oblong th...

The mast alone should be worth more than that.

It sounds like the best, and only solution, in my opinion is to get 2 boats. I can not think of any one boat that will do all that you are asking.

I do have one, but it is an EPO in very good condition $100

Thanks for the info, it is appreciated.

I am not sure that the person who is upset with slosails knows how much positive advertising he has generated for the company with all these posts.

By all means look for a newer set of hulls, at least mid 80's

Thanks Kraven, was able to print out and take to boat while going over it.

I would consider making 2 new ones while I was at it and save the original for a template.bananaboat wrote: I think is more of a centerboard than a Da...

The hooters that I have seen on nacra 6.0s were all roller furling, and if I recall quite a few masts were bent using the hooters.RicardOben wrote: Th...

The port behind the beam was probably put there for the original repair. At least they put it aft of the beam and not in front of. Edchris177 wrote: T...

With older boats, once it starts it is very hard to stop. it just seems to keep on growing. It is very hard to inspect what you can not see.

I think the guy sailing the H-18 was Dean Froome. Not sure about the spelling

After a failure of a rope lock I have been doubling them. Just put 2 back to back and put the rope through both. I assisted a Hobie dealer put togethe...

I forgot to ask, what are the last 2 numbers of the hull ID. I can't quite make them out in the pictures. It will indicate the year of the hulls?

Great buy, the bow foil alone cost $300 (the boat is considered a nacra 5.8 NA) which means bow foil and larger jib), and the sails look in very good ...

We had a P-16 totally fall apart from soft hulls last weekend at our beach, it truly collasped with the mast falling down with 3 people aboard. This i...

I am in South Florida and the boat appears to be in Utah. If the boat was here I would buy it. I like the looks.

I forgot to say, first clik on classified ad then my ads then open your ad

I think you have to go to "MY ADS" open the ad up select edit and go from there.

Parts from a nacra 20 will work as well, but it should be a midpole snuffer instead of an endpole snuffer because you have to carry the pole under the...

I just recently ordered new sails for my nacra 6.0 and had them put straps and buckles for all my battens, I also had them on my previous sails. I lov...

I plan on trying the oxy clean method. I am going to use my coffin style sail box lined with a piece of bill board material that I have left from maki...

That is the way they came back then. You can add a swivel, the one that I like is the one with a quick release. $25-$35 at Murrays depending on which ...

1979 G Cat

I doubt that they are line antifouling devices. If you notice, the fixture wraps the entire deck and down each side of the hull, pretty significant at...

You can leave the spinnaker at home but you will need to take the spinnaker pole and rig it if you have the self tacking jib system.. The controls for...

Remember when you go from a 5:1 to an 8:1 there will be a lot more mainsheet needed. Result will be more to sheet in and more to payout to depower. Yo...