Catamaran News

Classified Ads

Forums

Calendar

Contact Us

TheBeachcats.com Logo
Phoenix 18 Mast Nee...
 
Notifications
Clear all

Phoenix 18 Mast Needed

7 Posts
5 Users
0 Reactions
2,947 Views
(@bill6159)
Posts: 2
Newby
Topic starter
 

I am a new member to TheBeachCats.com and am impressed with the knowledge possessed by the forum contributors. I would like some advice. I have a Phoenix 18 (circa mid sixties to mid seventies) that is missing the mast. The tramp and sails are in good shape. I also have the boom. Problem is we lost the mast in a fire a few years ago. At the time of the fire the mast was stored in an area apart from the cat. We think scavengers went through the debris and removed the mast for scrap metal. We loved the way the Phoenix sailed and would like to get it up and running again if it makes economical sense. It has one pontoon that leaks a bit, but other than that is in good shape.

Our first choice would be to obtain a mast for it if we could find one at a cost that would not exceed the total value of the completed boat. The boat is in northern lower Michigan. Ideas about how to proceed will be most appreciated.

Bill D.

Edited by bill6159 on Aug 02, 2011 - 03:32 PM.

 
Posted : August 2, 2011 9:28 am
pete begle
(@pbegle)
Posts: 879
Chief
 

Post a pic of the mast ball on crossbeam. Measure the luff of the mainsail & send pic of boom gooseneck. No big deal;it'll cost you about $350 and you'll have to pick up in Detroit or Grand Rapids. Where in Northern MicH? Pete

prindle pete

 
Posted : August 2, 2011 10:16 am
Damon Linkous
(@damonadmin)
Posts: 3521
Admin
 

Is this four Phoenix 18's on the site now? Cool, you guys should start up an owners association. 😎

____________
Damon Linkous

 
Posted : August 2, 2011 10:50 am
(@argento102)
Posts: 38
Lubber
 

DamonLinkous wrote: Is this four Phoenix 18's on the site now? Cool, you guys should start up an owners association. 😎

My thoughts exactly DamonLinkous...

I have a pic of the mast step and ball on my MEMBERS pics BILL6159...

 
Posted : August 3, 2011 8:56 am
pete begle
(@pbegle)
Posts: 879
Chief
 

Thanks to your photo album, Darren, Phoenix base looks a lot like H-16. Looks to me if H-16 ball was cut down a bit, it would catch the "stops" on Phoenix beam base. H-16 mast is 26'--might be enough for Phoenix sail. Pete

prindle pete

 
Posted : August 3, 2011 10:05 am
(@bill6159)
Posts: 2
Newby
Topic starter
 

Thanks for looking into this for me guys. I will check that out.

Bill

 
Posted : August 3, 2011 3:51 pm
(@k2sno070)
Posts: 15
Lubber
 

I am looking to sell my phoenix 18. Hulls need work but mast, rigging, sails, and tramp are in fair-good condition. Send me a message if you are interested. Just picked up a H16 so I'm looking to sell quick.

 
Posted : August 18, 2011 10:33 am