Hi there
I've very new to this website and have just bought another P16 after about 15 yrs. Got an absolute bargain on ebay - Aussie $860 for a superb condition P19 on a registered trailer.
The new cat, like my last one, doesn't have any rigging to allow me to raise/lower the jib whilst the mast is up.
I found some general comments on this site regarding jib 'uphaul' arrangements but would really appreciate if there was anyone with a photo or diagram they could post - a picture tells a thousand words !!
Similarly, I've read that the P16 goes like a dog if the mast rake is incorrect. Does anyone have a photo or picture shoing how I measure and set the correct rake angle?
Thanks in advance
Wazza_s
(Newcastle, Australia)
I have sailed and raced P-16 for many years and I never carried any mast rake, most of us carried the mast straight up and the boat seemed to perform very well. The P-16 has a lot more volume forward than a Hobie 16 and does not need the rake that the Hobie does. You can download a Prindle manual from the Performance site, either USA or Europe.
Thanks for the quick reply Hullflyer. Do you know the URL for the website with the manual. I just Googled and couldn't see much making sense.
looks like performance catamarans have reorganised their website somewhat
but the prindle stuff was still buried in there at
http://www.nacra.us/Prindles/Prindle151618Manual.pdf
1982 nacra 5.2
2009 weta