Notifications
Clear all
Topic starter
Have an end pole snuffer. Anyone know where to get, the part number, or what to do about replacing the plastic piece in the end with the hole that attaches to the cross-bar? Been searching Murray's/ H20 Sensations but all the end caps I find seem to be for the mid-pole/smaller diameter.
Thanks for any help!
Posted : August 2, 2020 10:57 am
Try Rick Bliss at New England Catamarans. He is a Nacra dealer and should be able to help you out.
Pete
H18m
p16
Venture15
Posted : August 2, 2020 12:20 pm
This one at Murrays says it is 2 inch. What I.D. is your pole?
https://www.murrays.com/product/56-9631/
Pete
H18m
p16
Venture15
Posted : August 2, 2020 1:11 pm
There is one on ebay. Spinnaker end pole snuffer hoop
Edit: after re-reading your post, your looking for the pole cap. Not the snuffer hoop.
Edited by geepaks on Aug 03, 2020 - 02:55 PM.
Posted : August 3, 2020 3:18 am