Notifications
Clear all
Topic starter
Can someone who has one of these boats with the 4" diameter beams tell me what the wall thickness of the beam is? (I do not know which boat has the 4 inch beams, but I think the 17 thru 20 loa do. Not an owner.)
Much thanks.
Posted : February 10, 2014 10:49 am
Bob,
It is something like 0.086", which you can't find. You'll have to go with 0.125" tube if you are trying to purchase new, which I did when I rebuilt one of my 5.2's. If you need the bolt rope (Kedder) bar for the tramp I can point you in the right direction.
Posted : February 11, 2014 2:03 am
I measured thinner than that, but not quite 0.065" thin. You might be able to find 0.095".
Rob
Nacra 5.2
OKC, OK
Posted : February 11, 2014 3:14 am