need to replace the ball bearing in my traveler could someone tell me how many and what size i need to order
thka
considering your boat came out 44 years ago you may need to include what type of traveler car you have
maybe a pic too?
MN3
its a harken traveler!
https://www.murrays.com/product/28-0177
Or call Sailing Services, they sold me the bearings to rebuild a Harken furler, good people.
IIRC, you need 21 for the traveler.
Edited by Edchris177 on Oct 21, 2019 - 10:27 PM.
E C Hilliard
Nacra 5.7
Bombardier Invitation
I have a Harken traveler with captured bearings. Send cell for pic. 909-800-5237
prindle pete
thanks everyone FYI harken has a video on the rebuild and i ordered everything from murrys thanks again
spstack13 wrote: thanks everyone FYI harken has a video on the rebuild and i ordered everything from murrys thanks again
Remember, the car is only half the system. Have a close look at the track. Rough spots or grit can ruin your new cars bearings pretty quick.
E C Hilliard
Nacra 5.7
Bombardier Invitation
I know the car. The bearings are not enclosed. You will need a loading car. I may have one. It is a blue piece that looks like a traveler track. It has a cut out for loading the ball bearings. I don't recall how many ball bearings. I used to have a jar full of bearings for this reason. You can call Harken direct and they will send/sell you the loader and the bearings. .
you can also use shaving cream to keep the balls in place and simply rinse away the shaving cream when done
texastuma wrote: I know the car. The bearings are not enclosed. You will need a loading car. I may have one. It is a blue piece that looks like a traveler track. It has a cut out for loading the ball bearings. I don't recall how many ball bearings. I used to have a jar full of bearings for this reason. You can call Harken direct and they will send/sell you the loader and the bearings. .
MN3
[quote=MN3]you can also use shaving cream to keep the balls in place and simply rinse away the shaving cream when done
Good to know... My Tornado has a Ronstan car with open races... I do have a loader, but I'll keep that in mind.