Trailer mounted box to dry life vests/ trapeze harnesses


how about a truck bed box with holes drilled in it in a few places for ventilation?
In my previous sail box i cut out a few 3" holes, covered them with patio screen material, and covered that with a plastic vent cover i purchased from west marine.
WHEN i do it to my current box. i will just draw 4" circle, use a small drill bit and drill out a few dozen holes. then cover that with some screen and call it done. no need for the vent cover imho
MN3


A pile of wet sailing gear is never going to dry if it is in a box. I don't care how many vent holes you put in it.
Probably correct
mine was more for reducing condensation
How about simply attaching them to your hiking straps for the drive home? (that's what i do if they are wet)
I then wash them down with fresh water as i wash the boat off. and leave them there to dry
I put them away (in a big plastic box) in my garage later / if at all
they can sit on my cat (under a tarp or canopy)
MN3

I have a dock box next to my boat, however it usually fills up with other things. What I've been doing is leaving my wet gear on the mesh trampoline and then relying on the boat cover to keep the rain off. That has worked very well for me overall, saves my car from wet gear and my house from storing it. Once a month I take it home for deep cleaning.
I have mounted one of these on my trailer before: https://www.lowes.com/pd/Blue-Hawk-30-5-in-Black-Plastic-Wheeled-Tool-Box/3355634
Most boxes leak in the rain. Space will be limited but its good for hanging mainsheets and storing lifejackets.


- 19 Forums
- 8,517 Topics
- 75.8 K Posts
- 0 Online
- 37.7 K Members